Devin Mfg.,Inc.

CNC AND NC EQUIPMENT

MANUFACTURER/DESCRIPTION

MORI-SEIKI
Model SL-35 CNC turning center. New 1994. 15” chuck, 23.5” swing, 40 HP two speed gear box spindle drive. 10 tool turret with tailstock. 36” shaft capacity with a 3.75” spindle hole. High pressure coolant.

DOOSAN
Model V 850 CNC Vertical Lathe. New 2001. 24” chuck 39.4” swing, 33.5" maximum turning diameter, 33.5" maximum turning length, 50 HP two speed geared spindle drive. 12 tool turret.

IKEGAI
Model TU-26 new 1994. 10” and 12” chucks, 5C collet chuck, 18” swing, 25 HP geared head. 12 tool turret with tailstock. 24” shaft capacity with a 3” spindle hole.

IKEGAI
Model TU-26L new 1997. 10” and 12” chucks, 5C collet chuck, 18” swing, 25 hp geared head, 12 tool turret with tailstock, 40” shaft capacity with 3” spindle hole.

IKEGAI
Model TU-26 new 1999. With Chip Blaster high pressure (1200psi)coolant. 10” and 12” 3-Jaw chucks,5C collet chuck, 18” swing, 25 HP geared head, 12 tool turret with tailstock, 24” shaft capacity with a 3” spindle hole.

HITACHI-SEIKI
Model 4NEII-600 CNC turning center. 10” chuck size, 15/20 HP 12 tool turret with tailstock, 24” shaft capacity, 2” bar capacity, spindle speeds 20-3150 RPMs.

KIA
2006 Model SKT25 CNC Turning Center with 20" turning capacity. Main spindle: 25/20 HP 3,600 RPM, mounted with a 10" power 3-jaw chuck or a 16C collet nose. Has bar capacity of 3". Turret: Twelve tool turret and fully programable tailstock.

KIA
2007 Model SKT21 LMS CNC Turning Center with Live tooling,sub-spindle and bar fed up to 2.6" diameter with an LNS servo driven bar feed. Main spindle: 20/15 HP 4,000 RPM, mounted with a 2-58" capacity dead length collet chuck or 8" power 3-jaw chuck. Sub-spindle: 5/3 HP 6,000 RPM, mounted with a 16C collet chuck or a 5.3" power 3-jaw chuck. Turret: Live with 4,000 RPM 12 tool VDI mounted tooling. Indexes tool to tool in .3 second.

KIA
2005 Model SKT15 LMS CNC Turning Center with Live tooling,sub-spindle and bar fed up to 1.73" diameter with an LNS servo driven bar feed. Main spindle: 15/10 HP 6,000 RPM, mounted with a 16C dead length collet chuck or 6" power 3-jaw chuck. Sub-spindle: 5/3 HP 6,000 RPM, mounted with a 16C collet chuck or a 5.3" power 3-jaw chuck. Turret: Live with 4,000 RPM 12 tool VDI mounted tooling. Indexes tool to tool in .3 second.

OKK
Model VM5II vertical machining center with 'through-the-spindle' high pressure (1200psi)coolant. New 2001. 25 HP, 50 taper, 2 geared head 8000 RPM spindle drive. 42” x 20” x 20” work envelope with 41” x 22” table capable of handling 1,764#.

OKK
Model VM5 vertical machining center new 1997. 15 HP 2 geared head 8000 RPM spindle drive. 32” x 20” x 20” work envelope with 41” x 22” table capable of handling 1,764#.

OKK
Model MCV550 vertical machining center new 1995. 30 HP 3 geared head spindle drive. 42” x 22” x 29” work envelope with a 22” x 50” table.

HAAS ROTARY TABLE
Model HRT-310 program controlled 12” rotary table, new 1998. Indexing accuracy within 15 seconds; repeatability within 10 seconds.

HAAS ROTARY TABLE
Model HRT-210 New 2001. Program controlled 8/10” rotary table. Step sizes 1 minute of a degree. Indexing accuracy within 15 seconds; repeatability within 10 seconds

HAAS ROTARY TABLE
New 1999. Program controlled 8/10” rotary table. Step sizes 1 minute of a degree. Indexing accuracy within 15 seconds; repeatability within 10 seconds.

HAAS ROTARY TABLE
Program controlled 8/10” rotary table. Step sizes 1 minute of a degree. Indexing accuracy within 18 seconds; repeatability within 22 seconds.

HAAS 5C INDEXER
Program controlled 5C collet indexer. Step sizes 1 minute of a degree. Indexing accuracy within 18 seconds; repeatability within 22 seconds.

For more information:
Devin Mfg., Inc.
40 Edward Street
Arcade, NY 14009-0097 US
Email: billdevin@devinmfg.com
(585)496-5770
(800) 494-5770
Fax: (585) 492-2062